Cool How To Prime A Pool Pump With Sand Filter Ideas
Cool How To Prime A Pool Pump With Sand Filter Ideas. Close all the skimmer inlets, and then open the primary drain valve completely. 7) with the pump lid in its proper place and the air relief valve open, turn the system on.
12" Sand Filter w/Water Pump 2400GPH 4Above Ground Swimming Pool Soft from econosuperstore.com
Open the valve to release the air pressure. Refill the strainer with water, close the lid, turn on the pump and open the same valve. 8) check for consistent water flow in the pump basket.
Kostenloser Versand (De) Für Berechtigte Bestellungen!
Open the valve to release the air pressure. Let the pump sit for about 30 seconds to a minute. For maximum safety turn off the power at the circuit breaker to the motor.
The Filter Shown In The Video Is Hayward Sand Filter But These Operations A.
Reopen the strainer, bleeding off pressure by opening the air relief on the filter or slowly opening the strainer lid to allow the pressure to escape. This will remove any excess air. 7) with the pump lid in its proper place and the air relief valve open, turn the system on.
Find The Air Relief Valve On Top Of The Pool Filter.
Close all valves on the suction side of the pump, including the main drain, skimmer and vacuum lines. You can buy backwash hoses quite cheaply on amazon. If your pump has an air release valve, open it.
If Your Filtration Equipment Utilizes A Sand Filter Then Change The Multiport Valve Orientation To Recirculate While The Pump Is Still Off.
If your pool drains into your garden/yard etc and you have a backwash hose attached to the drainpipe then roll it out and position the end where you want the water to run. Bleed the air out of the filter once the water is nicely flowing in the pump pot, bleed the air out of your filter. 6) using a garden hose, fill the pump basket with water.
Some Pumps Have An Air Release Valve, If You Do, Open It.
Follow steps 1 to 8 for pools that include main drains and cartridge filter. Close the valve first, then turn off the pump. The suction diverter valve allows you to shut off the water from.
